• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
CALIBRATION PROCEDURE FOR SPECTRUM ANALYZER - Continued

Calibration Procedure For Spectrum Analyzer, If, Lf, And Rf Plug-In Units, Models 8552, 8553, 8554, 8555, And 8556 Page Navigation
1  2    3    4    5    6  
img
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*TB 9-6625-1914-24
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
SPECTRUM ANALYZER,
IF, LF, AND RF PLUG-IN UNITS,
HEWLETT-PACKARD, MODELS
8552( ), 8553( ), 8554( ), 8555( ), AND 8556( )
Headquarters, Department of the Army, Washington, DC
1 October 2008
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve these
procedures, please let us know.  Mail your letter or DA Form 2028 (Recommended Changes to
Publications and Blank Forms) directly to: Commander, U.S. Army Aviation and Missile Command,
ATTN: AMSAM-MMC-MA-NP, Redstone Arsenal, AL 35898-5000. A reply will be furnished to
you.
You  may also send in your comments electronically to our E-mail address:
2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546.  For the World Wide Web use:
https://amcom2028.redstone.army.mil. Instructions for sending an electronic 2028 can be found at
the back of this manual.
Paragraph
Page
SECTION
I.
IDENTIFICATION AND DESCRIPTION
Test instrument identification ..........................
1
3
Forms, records and reports ...............................
2
3
Calibration description......................................
3
3
II.
EQUIPMENT REQUIREMENTS
Equipment required ..........................................
4
5
Accessories required ..........................................
5
5
III.
CALIBRATION PROCESS FOR SPECTRUM
ANALYZER IF PLUG-IN, HEWLETT-
PACKARD, MODEL 8552( )
Preliminary instructions ...................................
6
6
Equipment setup................................................
7
7
Calibrator output amplitude .............................
8
10
Calibrator output frequency accuracy ..............
9
12
Bandwidth accuracy ..........................................
10
13
Amplitude display accuracy ..............................
11
15
Scan time accuracy ............................................
12
17
Power supply check............................................
13
19
_________
*This technical bulletin supersedes TB 9-6625-1914-35, dated 28 May 2004.


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.