DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
MULTIMETER, ME-26( )/U AND
HEWLETT-PACKARD
MODELS 410B AND 410C
Headquarters, Department of the Army, Washington, DC
22 August 2003
Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to
improve these procedures, please let us know. Mail your letter or DA Form 2028
(Recommended Changes to P blications and Blank Forms)directly to: Commander,
u
U.S. Army Aviation and Missile Command, ATTN: AMSAM-MMC-MA-NP, Redstone
Arsenal, AL 35898-5000. A reply will be furnished to you. You may also provide DA
Form 2028 information to AMCOM via e mail, fax, or the World Wide Web. Our fax
-
number is DSN 788-6546 or Commercial 256-842-6546. Our e-mail address is:
2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found at
the
back
of
this
manual.
For
the
World
Wide
Web,
use
https://amcom2028.redstone.army.mil.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification .............................
Forms, records, and reports.................................
Calibration description ........................................
EQUIPMENT REQUIREMENTS
Equipment required ............................................
Accessories required............................................
CALIBRATION PROCESS FOR
MULTIMETER,ME-26( )/U, AND
HEWLETT PACKARD, MODEL 410B
Preliminary instructions.....................................
Equipment setup.................................................
Dc voltage...........................................................
Ac voltage...........................................................
Frequency response.............................................
Resistance ..........................................................
Final procedure...................................................
_________
*This bulletin supersedes TB 9-6625-2114-35, dated 18 March 2002.
