TB 9-6625-2322-24
(15) Reduce all outputs to minimum.
(16) Disconnect equipment setup.
b. Adjustments. No further adjustments can be made.
13. Frequency Modulation
a. Performance Check
(1) Connect equipment as shown in figure 6 below.
Figure 6. Frequency modulation hook-up.
(2) Set measuring receiver to measure frequency modulation, with +PEAK detector,
<20 Hz high pass and >200 kHz lo pass filters.
(3) Press TI keys as listed in (a) through (j) below.
(a) SYSTEM, Rest.
(b) OUTPUT off.
(c) Level Control, L0, Edit L0, 0, and dB.