TB 9-6625-2365-35
(g) Enter (Manual Freq: highlighted).
(h) Menu 6, 0, 0, MHz.
(i) Return to Meas.
(5) Set synthesized signal generator for pulse modulation with a pulse width of 100 ns
and a period of 500 ns.
(6) Press TI Meas Mode Burst CW key (Burst LED lit). TI frequency indication
will be within limits specified in first row of table 7.
(7) Set synthesized signal generator pulse modulation to off.
(8) Repeat technique of (3), (4)(a), (g), (h), (i), (5) and (7) above for synthesized signal
generator frequencies and power meter no. 1 indications listed in table 7. TI frequency
indication will be within limits specified in table 7.
Synthesized signal
Power meter
Test instrument indication limits
generator
no. 1
(MHz)
Frequency
Indication (dBm)
Min
Max
600 MHz
-33.0
599
601
1 GHz
-33.0
998
1002
5 GHz
-33.0
4996
5004
10 GHz
-33.0
9994
10006
12.5 GHz
-28.0
12493
12507
15 GHz
-28.0
14991
15009
18 GHz
-28.0
17990
18010
(9) Adjust synthesized signal generator frequency to 600 MHz and RF output
amplitude controls for a -33 dBm indication on power meter no. 1.
(10) Press TI keys as listed in (a) through (j) below.
(a)
Menu Burst.
(b)
Resolution < or > (until Mode is selected).
(c)
Enter (Mode [ Freq/Width/Period] is displayed).
(d)
Resolution < or > (until Width is highlighted).
(e)
Enter (Mode [Width] is selected).
(f)
Menu Freq.
(g)
Resolution < or > (until Set Freq is selected).
(h)
Enter (Manual Freq: is displayed).
(i)
Menu, 6, 0, 0, MHz.
(j)
Return to Meas.
(11) Set synthesized signal generator for pulse modulation with a pulse width of 100 ns
and period of 1.1 s. TI burst width indication will be within limits specified in first
row of table.
(12) Set synthesized signal generator pulse modulation to off.
(13) Repeat technique of (9), (10)(f) through (j), (11) and (12) above for synthesized
signal generator frequencies, pulse widths, periods and power meter No. 1 indications listed
12 CHANGE 2
