TB 9-6625-2365-35
Power meter
Test instrument
Synthesized signal generator
no. 1
indication limits
Indication
Width
Period
(dBm)
Min
Max
600 MHz
100 ns
1.1
s
-33.0
0.080 s
0.120
s
600 MHz
1 s
2
s
-33.0
0.980 s
1.02
s
600 MHz
10 s
11
s
-33.0
9.08 s
10.02
s
600 MHz
100 s
101
s
-33.0
99.08 s
100.02
s
600 MHz
1 ms
1.001 ms
-33.0
999.08 s
1000.02
s
600 MHz
10 ms
10.001 ms
-33.0
9999.08 s
10000.02
s
600 MHz
100 ms
100.001 ms
-33.0
99999.08 s
100000.02
s
18 GHz
100 ns
1.1
s
-28.0
0.080 s
0.120
s
18 GHz
1 s
2
s
-28.0
0.980 s
1.02
s
18 GHz
10 s
11
s
-28.0
9.08 s
10.02
s
18 GHz
100 s
101
s
-28.0
99.08 s
100.02
s
18 GHz
1 ms
1.001 ms
-28.0
999.08 s
1000.02
s
18 GHz
10 ms
10.001 ms
-28.0
9999.08 s
10000.02
s
18 GHz
100 ms
100.001 ms
-28.0
99999.08 s
100000.02
s
(14) Reduce all outputs to minimum and connect equipment as shown in figure 4
connection A.
and RF output level controls for a -28 dBm indication on power meter no. 1.
(16) Turn synthesized signal generator RF OUTPUT off (do not change output
setting) and connect equipment as shown in figure 4 connection B.
(17) Press TI keys as listed in (a) through (j) below:
(a) Menu Burst.
(b) Resolution < or > (until Mode is selected).
(c) Enter (Mode [ Freq/Width/Period] is displayed).
(d) Resolution < or > (until Freq is highlighted).
(e) Enter (Mode [Freq] is selected).
(f) Menu Freq.
(g) Resolution < or > (until Set Freq is selected).
(h) Enter (Manual Freq: is displayed).
(i) Menu, 1, 8, ., 1, GHz.
(j) Return to Meas.
(18) Set synthesized signal generator for pulse modulation with a pulse width of 100 ns
and period of 500 ns and turn synthesized signal generator RF OUTPUT on. TI burst
frequency indication will be within limits specified in first row of table 9.
(19) Turn synthesized signal generator RF OUTPUT off.
(20) Repeat technique of (14) through (16), (17)(f) through (j), (18) and (19) above for
frequencies and power meter no. 1 indications listed in table 9. TI burst frequency
indication will be within limits specified in table 9.
CHANGE 2 13
