TB 9-6625-2190-24
Paragraph
Page
Dc voltage ...............................................................
Dc current ..............................................................
Ac voltage ...............................................................
Resistance ..............................................................
Final procedure ......................................................
CALIBRATION PROCESS FOR FLUKE 80K-6
HIGH VOLTAGE PROBE
Preliminary instructions .......................................
Equipment setup ...................................................
Dc voltage ...............................................................
Final procedure ......................................................
IDENTIFICATION AND DESCRIPTION
1. Test Instrument Identification.
This bulletin provides instructions for the
calibration of Digital Multimeters, AN/PSM-45A (FLUKE 27/FM) and Fluke, Models 27 and
27/AN and High Voltage Probe, Fluke, Type 80K-6. Army Specification No. 3002838,
manufacturers' manuals, and TM 11-6625-3199-14 were used as the prime data sources in
compiling these instructions. The equipment being calibrated will be referred to as the TI
(test instrument) throughout this bulletin.
a. Model Variations. Variations among models are described in the text and tables.
b. Time and Technique. The time required for this calibration is approximately 1
hour, using dc and low frequency technique.
2. Forms, Records, and Reports
a. Forms, records, and reports required for calibration personnel at all levels are
prescribed by TB 750-25.
b. Adjustments to be reported are designated (R) at the end of the sentence in which
they appear. When adjustments are in tables, the (R) follows the designated adjustment.
Report only those adjustments made and designated with (R).
3. Calibration Description. TI parameters and performance specifications which
pertain to this calibration are listed in table 1.
