TB 9-6625-2320-35
(34) Press front-panel TRIGGER MENU key.
(35) Press main-menu Slope key.
(36) Press front-panel SET LEVEL TO 50% key.
(37) Adjust front-panel TRIGGER MAIN LEVEL knob until TRIG'D light is on.
Set level to near the middle of range where the TRIG'D light is on.
(38) If TI waveform trigger is not stable for both the positive and negative slopes,
perform b below. Press side-menu
and
keys to switch between trigger slopes.
(39) Press side-menu
key.
(40) Press front-panel HORIZONTAL MENU key.
(41) Press main-menu Time Base key.
(42) Press side-menu Delayed Only key.
(43) Press side-menu Delayed Triggerable key.
(44) Press front-panel Shift key.
(45) Press front-panel DELAYED TRIG key.
(46) Press main-menu Level key.
NOTE
Notice in the following step the side-menu SET TO 50% key
is called for, not the front-panel SET LEVEL TO 50% key.
(47) Press side-menu SET TO 50% key.
(48) Press main-menu Slope key.
(49) If TI waveform trigger is not stable for both the positive and negative slopes,
perform b below. Press side-menu
and
keys to switch between trigger slopes.
Adjust front-panel TRIGGER MAIN LEVEL knob to stabilize main trigger, and front-
panel general purpose knob to stabilize delayed trigger if required.
(50) If TI waveform trigger is not stable for both the positive and negative slopes,
perform b below. Press side-menu
and
keys to switch between trigger slopes.
(51) Press side-menu
key.
29
