TB 9-4920-467-24
Figure 23. VoCmp Connection.
b.
Adjustments. Perform paragraph 13.
15. VoCal
a.
Performance Check
(1) Select and activate VoCal from the Circuit menu on the UxValidator. VoCal will
appear in the Circuit field.
(2)
Connect equipment as shown in figure 24.
(3)
Select and activate Test from the POD Alignment screen on the UxValidator.
(4) Set the calibrators 1 and 2 to output 1.000 and 17.2000 V dc respectively. If TI
VoCal equation does not indicate 0.000 0.008 V dc on the UxValidator, perform b below.
Press the TI ETTS BrainPak left Encoder knob to exit test mode.
(5)
If the Performance Check passes, proceed to Jrtc .Paragraph 16 below.
(6)
Figure 24. VoCal Connection.