Figure 6. Power splitter measurement (26.5 to 40 GHz)

TB 9-5985-314-24

(33) Record receiver system indication in OUTPUT PORT 3 column of table 8.

(34) Adjust signal generator No. 1 and signal generator No. 2 frequency controls to

remaining settings listed in table 8. Measure and record insertion loss for OUTPUT

PORT 3 in table 8. Insertion loss will be approximately equal to value listed in Appendix D.

(35) Algebraically calculate the difference between the values recorded in table 8 for

OUTPUT PORT 2 and OUTPUT PORT 3. Record difference in OUTPUT PORT

TRACKING column of table 8. Output tracking will be within the limits specified listed in

NOTE

Perform (36) through (48) below for TI with frequency range

from 26.5 to 40 GHz.

(36) Connect equipment as shown in figure 6.

Figure 6. Power splitter measurement (26.5 to 40 GHz) - equipment setup