TB 9-6625-2320-35
(32) Press front-panel CURSOR key.
(33) Press main-menu Function key.
(34) Press side-menu V Bars key.
(35) Press front-panel CLEAR MENU key.
(36) Align one V bar cursor to the time reference point of the left-most waveform
edge and the other cursor to the time reference point of the right-most waveform edge
by rotating front-panel general purpose knob. (Press SELECT key to switch between
the two cursors.)
(37) If TI ∆ cursor readout does not indicate ≤50 ps, perform b below.
13. Time Base Accuracy
a. Performance Check
(1) Connect calibration generator trigger output to CH 1 .
(2) Position calibration generator output for a 10 ms marker output.
(3) Press front-panel SETUP key.
