DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
CALIBRATION PROCEDURE FOR
PORTABLE PRESSURE CALIBRATOR
DRUCK, MODEL DPI-610 700MB
Headquarters, Department of the Army, Washington, DC
3 February 2015
Distribution Statement A: Approved for public release; distribution is unlimited.
REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS
You can improve this manual. If you find any mistakes or if you know of a way to improve
these procedures, please let us know. Mail your letter or DA Form 2028 (Recommended
Changes to Publications and Blank Forms) directly to: Commander, U.S. Army Aviation and
Missile Command, ATTN: AMSAM-MSS-LP, Redstone Arsenal, AL 35898-5000. A reply will be
furnished to you. You may also send in your comments electronically to our E-mail address:
2028@redstone.army.mil or by fax 256-842-6546/DSN 788-6546. For the World Wide Web use:
https://amcom2028.redstone.army.mil. Instructions for sending an electronic 2028 can be found
at the back of this manual.
Paragraph
Page
IDENTIFICATION AND DESCRIPTION
Test instrument identification .............................
Forms, records, and reports .................................
Calibration description .........................................
EQUIPMENT REQUIREMENTS
Equipment required..............................................
Accessories required .............................................
CALIBRATION PROCESS
Preliminary instructions ......................................
Equipment setup...................................................
Dc voltage ..............................................................
Dc current ..............................................................
Temperature..........................................................
Internal pressure < 55 psi ....................................
Internal pressure < 3000 psi ................................
Final procedure .....................................................
DATABASE DOWNLOAD AND INSTALL
INSTRUCTIONS
B-1
TEST SET-UP
