TB 9-4920-467-24
Figure 13. Unlock Alignment Screen.
NOTE
To facilitate the unlock alignment process; turn the TI ETTS
BrainPak left Encoder knob so the set screw is at the 6 o'clock
position. A turn of 360 degrees or (16 clicks) will return the
Encoder knob to the starting position. This serves only as a
quick reference point. The position of the knob does not affect
the unlock process, only that it is turned 360 degrees or
(16 clicks).
bb. To unlock Alignment, perform steps (1) through (3) below:
Press and hold down the TI ETTS BrainPak left Encoder knob.
(1)
(2) While holding the knob down, rotate it exactly 360 degrees (16 clicks) in
either direction.
Release the Encoder knob.
(3)
cc. Enter the date into the POD Alignment Date entry screen on the UxValidator.
dd. The POD Alignment performance checks and alignment screen is displayed as
shown in figure 14.
Figure 14. POD Alignment Screen.
ee. Select and activate Circuit to access the Circuit menu. Select and activate Vpri from
the menu. Vpri will appear in the Circuit field.
9
